Best 5mm Thick Vinyl Flooring for Durable, Easy-Install Floors
For a 5mm-thick vinyl floor, compare the core, wear layer, attached underlayment, installation style, and coverage per box—not thickness alone. Home Aesthetics is best for a wood-look DIY project; Suntecwood’s walnut and oak options suit buyers who want a waterproof rigid core with attached sound-absorbing underlay; Diflart emphasizes a thicker 22 mil wear layer; and Lucida Surfaces pairs 5mm planks with a 20 mil wear layer and integrated underlayment.
| Product | Best for | Notable listed feature |
|---|---|---|
| Home Aesthetics Grey Oak | Wood-look DIY installation | 12 mil wear layer; 21 sq. ft. per box |
| Suntecwood Walnut | Busy households | Waterproof SPC core and IXPE underlay |
| Diflart SPC Plank | Higher wear-layer priority | 22 mil wear layer |
| Lucida Surfaces MaxCore Pro | Rooms where quieter steps matter | 20 mil wear layer and IXPE underlayment |
| Suntecwood Oak-3 | Oak appearance with rigid-core features | Waterproof SPC core and IXPE underlay |
Home Aesthetics Grey Oak Vinyl Planks
These 5mm interlocking planks are best for homeowners seeking a grey oak wood-grain look and a snap-lock installation. Each box covers 21 square feet and contains 14 planks measuring 36 by 6 inches. The listed features include HD film prints, micro-bevel edges, a 12 mil wear layer, and a urethane and ceramic bead finish.
The product is described as waterproof and intended for high-traffic areas. Choose it if a shorter plank format and a DIY locking system fit your project. Its stated wear layer is 12 mil, so buyers comparing surface-wear protection should note that other options here list thicker wear layers.
Suntecwood Walnut SPC Flooring
This 5mm walnut option is best for households looking for a rigid-core floor with spill resistance and an attached underlay. The listing specifies a 3.2mm SPC core, a 0.3mm wear layer, and a 1.0mm IXPE underlay. It states that the flooring is 100% waterproof and does not require glue for installation.
The attached underlay is presented as a way to reduce footstep noise and add comfort underfoot. Consider it for kitchens, bathrooms, basements, or busy homes where those features are priorities. The listed coverage is 21.4 square feet per box; measure the room and allow for cuts before ordering.
Diflart 5mm SPC Click-Lock Planks
Diflart is best for buyers who want a stated 22 mil wear layer in a 5mm rigid-core plank. Each box contains 10 planks and covers 20 square feet. The planks measure 48 by 6 inches, and the listing describes the SPC material as waterproof and resistant to dents and impacts.
The listed wear layer is thicker than the 12 mil layer specified for the Home Aesthetics option, making this a useful comparison for buyers focused on surface protection. UV coating is also listed for color retention. The product details do not specify an attached underlayment, so check the installation instructions and subfloor requirements before planning the project.
Lucida Surfaces MaxCore Pro
Lucida Surfaces is best for buyers who want a 5mm click-lock plank with a listed 20 mil wear layer and integrated IXPE sound-reduction underlayment. The product is described as waterproof and easy to clean, with micro-beveled edges, a matte finish, and HD wood-grain prints. Its stated coverage is 24.5 square feet per pack.
The listing identifies the planks for residential spaces such as living rooms, bedrooms, and hallways, and also names kitchens, bathrooms, and basements as moisture-prone applications. Choose this option if the attached underlayment and larger listed pack coverage suit your needs. Confirm the selected wood style and installation requirements before purchase.
Suntecwood Oak-3 SPC Flooring
This oak-look Suntecwood option is best for buyers who prefer an oak appearance but want the same listed rigid-core and underlay features as the walnut version. It is 5mm thick, covers 21.4 square feet per box, and has a stated 0.3mm wear layer tested over 15,000 abrasion cycles. The listing describes the SPC core as waterproof and the attached IXPE underlay as sound absorbing.
Choose Oak-3 if its appearance matches the room and you want a floating, no-glue installation. Its wear-layer specification is stated in millimeters, unlike products that give a mil figure, so compare manufacturer specifications carefully rather than assuming the numbers use the same unit.
Buying Guide: How To Choose 5mm Vinyl Flooring
Is 5mm thickness enough for a flooring project?
Thickness is one factor, not a complete measure of durability. A 5mm plank may combine a wear layer, decorative surface, core, and sometimes attached underlayment. Compare each product’s construction and follow its installation guidance. Check the existing floor height, door clearance, transitions, and subfloor condition before selecting a plank.
What does the wear-layer rating tell you?
The wear layer is the surface layer intended to protect the printed design from everyday wear. The products here list wear layers ranging from 12 mil to 22 mil, while Suntecwood gives a 0.3mm specification. These figures use different units; compare them carefully and consult the product documentation for the exact construction.
Should you choose SPC or another vinyl construction?
SPC refers to a rigid stone-plastic composite core. The Suntecwood and Diflart listings identify SPC construction, while Home Aesthetics describes interlocking vinyl planks. Rigid-core flooring may appeal to buyers prioritizing a firm core, but the product’s installation instructions and subfloor requirements remain important.
How much flooring should you order?
Measure the room’s length and width, calculate its square footage, and compare that figure with each box’s stated coverage. The products listed range from 20 to 24.5 square feet per pack. Account for cuts and layout waste, and verify the quantity and dimensions on the product listing before ordering.
Does attached underlayment matter?
An attached underlayment may reduce footstep noise and change the feel underfoot. Suntecwood and Lucida list integrated IXPE underlayment. If a plank does not specify an attached layer, do not assume one is included. Check whether the manufacturer permits separate underlayment before adding it.
Frequently Asked Questions
Is 5mm vinyl flooring waterproof?
Some 5mm options in this selection are described as waterproof, including the SPC products. Check the specific product details and installation instructions; thickness alone does not establish water resistance.
Can 5mm vinyl planks be installed without glue?
Several listed products use click-lock or interlocking installation, and Suntecwood specifies no glue is needed. Follow the instructions for the exact flooring and prepare the subfloor as directed.
Which option has the thickest stated wear layer?
Diflart lists a 22 mil wear layer, the highest mil rating stated among these products. Lucida lists 20 mil, and Home Aesthetics lists 12 mil.
Which 5mm flooring includes attached underlayment?
Suntecwood’s walnut and Oak-3 listings specify a 1.0mm IXPE underlay. Lucida Surfaces lists integrated IXPE sound-reduction underlayment.
Can 5mm vinyl flooring be used in a basement?
Some products listed here are described for basement or high-moisture use. Verify the chosen product’s instructions and prepare the basement subfloor according to its requirements before installation.