Best Bathroom Partition Door Hinges for Commercial Restroom Repairs
The best bathroom partition door hinges depend on the door’s swing direction, panel and pilaster dimensions, and existing hardware style. The Harris Hardware TP1100 is best for a complete inswing hardware replacement, while its TP2100 set suits outswing doors. For hinge-only projects, consider the aluminum wrap-around pair, Prime-Line surface-mount set, or a gravity pivot replacement. Check measurements and configuration before ordering: partition hinges are not universally interchangeable.
| Product | Best For | Key Detail |
|---|---|---|
| Harris Hardware TP1100 | Inswing door hardware replacement | Includes hinges, latch, hook, and fasteners |
| Harris Hardware Aluminum Wrap-Around Hinges | Hinge-only replacement | For 1-inch door and 1-inch pilaster |
| Prime-Line Surface Mount Hinge Set | Specified swing configurations | Right-hand inswing or left-hand outswing |
| Prime-Line 656-7220 Gravity Pivot | Pivot-style replacement | For 1-1/4-inch posts and panels |
| Harris Hardware TP2100 | Outswing door hardware replacement | Includes hinges, latch, hook, and fasteners |
Harris Hardware TP1100 Inswing Hardware Set
This complete set is best for replacing multiple components on a compatible inswing restroom partition door. It is designed for a 1-inch square door and a 1-1/4-inch pilaster, and includes hinges, a latch, a hook, and fasteners. That makes it a practical choice when the job requires more than hinge replacement alone.
The hinges are self-closing, and the closing position is adjustable. The door can be set to close fully or stay open at an angle. The hardware is made of cast zamac with a chrome-plated finish. Choose this if the door dimensions and inswing arrangement match; avoid it if the door swings outward or uses different post dimensions.
Harris Hardware Aluminum Wrap-Around Hinges
These hinges are best for a hinge-only project involving a 1-inch door and 1-inch pilaster. The pair has a bright anodized aluminum finish, measures 8 inches high and 3/16 inch thick, and includes mounting fasteners. A stainless steel pin with a nylon sheath supports an adjustable self-closing angle.
Choose this option when wrap-around construction and the listed dimensions suit the existing partition. Its specified pilaster size is 1 inch, so it is not the right selection for a system requiring a 1-1/4-inch pilaster. The product listing describes hinges and fasteners, not a complete door hardware set with a latch and hook.
Prime-Line Stainless Steel Surface Mount Hinge Set
This surface-mount set is best for repairing worn or damaged hinges when the door configuration is right-hand inswing or left-hand outswing. It is intended for commercial, institutional, and public restroom partitions. The stamped stainless steel components have a satin finish, and installation fasteners are included.
The listing names compatibility with partition systems including Accurate, All American, Ampco, American Sanitary, Fiat, Flush Metal, Global, General, Metpar, and Mills, as well as similar systems. Confirm the hinge style and handing before choosing it. Its stated configurations do not cover every door swing arrangement, and it is a hinge set rather than a complete latch-and-hook kit.
Prime-Line 656-7220 Gravity Pivot Hinge
This single-pack gravity pivot is best for a new installation, repair, or replacement that uses a compatible pivot-style partition hinge. It fits 1-1/4-inch-thick posts and panels and has a 1-3/32-inch key dimension. The construction is Zamak with a chrome-plated finish.
Choose this part when the existing setup calls for a post-mounted gravity pivot and its dimensions match. It is sold as a single pack, so check how many hinge components the repair requires. The product information does not specify a full hardware set or broad brand compatibility; compare the key dimension and the existing part before ordering.
Harris Hardware TP2100 Outswing Hardware Set
The TP2100 is best for an outswing door when a complete hardware set is needed. It is designed for a 1-inch square door and 1-1/4-inch pilaster post. The set includes hinges, a latch, a hook, and fasteners, so it can address more than a hinge-only repair.
Its cast zamac hardware has a chrome-plated finish. The self-closing hinges have an adjustable closing position, allowing the door to be set to close fully or remain open at an angle. Choose it over the TP1100 when the door swings outward. Avoid it if the door dimensions or pilaster size differ from those specified.
Buying Guide: How To Choose Bathroom Partition Hinges
Which door swing and hinge style do you need?
Start by identifying whether the door swings in or out, then determine whether it uses a surface-mounted, wrap-around, or gravity pivot hinge. Swing direction matters: the TP1100 is an inswing set, while the TP2100 is an outswing set. The Prime-Line surface-mount set lists right-hand inswing and left-hand outswing configurations. Do not assume a hinge designed for one arrangement will work in another.
What measurements should you check?
Measure the door or panel thickness and pilaster size, and compare the existing hinge dimensions or key measurements when available. The products here include options for 1-inch doors, 1-inch pilasters, and 1-1/4-inch posts or panels. Those dimensions are not interchangeable specifications. Matching the hinge style and mounting arrangement is also important, not just matching one measurement.
Do you need a hinge or a complete set?
Choose a hinge-only product when the latch, hook, and other hardware are usable. Select a complete set such as the TP1100 or TP2100 when those components also need replacement. Check the package description for quantity: the Prime-Line gravity pivot is listed as a single pack, while the aluminum wrap-around hinges are sold as a pair.
Which finish and material should you compare?
Finish and material can help you match existing restroom hardware. Options in this selection include chrome-plated zamac, bright anodized aluminum, and satin-finish stamped stainless steel. Compare the listed finish with the existing partition, but prioritize correct dimensions, hinge type, and door handing.
Frequently Asked Questions
Are bathroom partition door hinges universal?
No. Hinge type, door swing, pilaster size, panel thickness, and mounting configuration vary. Match these details with the product specifications before buying.
What is the difference between a gravity pivot and a surface-mount hinge?
A gravity pivot is a post-mounted pivot-style component. A surface-mount hinge attaches at the surface and has specified handing and swing configurations. Replace like with like unless the partition system allows a different style.
Can I replace only one hinge?
Yes, if the replacement part matches the existing hinge and the remaining hardware is serviceable. Check whether the selected product is sold as a single component or a pair.
Which option includes a latch and hook?
The Harris Hardware TP1100 and TP2100 sets include hinges, a latch, a hook, and fasteners. The other listed options focus on hinge or pivot replacement.
How do I identify the correct door handing?
Check the direction the door swings and the side on which the hinges are mounted, then compare that arrangement with the product’s stated handing. If uncertain, use the existing hinge and partition measurements as references.