Best Metal Legs for End Tables: Five Styles for DIY Furniture
The best metal legs for an end table depend on the height and look you want: 16-inch hairpin legs suit low, mid-century-style tables, while 24-inch legs work for taller side tables. The VEVOR set is best for buyers seeking four taller legs with a stated load capacity; ALLCOS is a wider two-leg option, and Likapop’s Z-shaped legs add adjustable feet. A round base offers a distinctive alternative, while SMARTSTANDARD provides a simple hairpin design.
| Product | Height | Set | Best For |
|---|---|---|---|
| SMARTSTANDARD Hairpin Legs | 16 inches | 4 legs | Low tables and a classic look |
| VEVOR Hairpin Legs | 24 inches | 4 legs | Taller tables with four-point support |
| ALLCOS Metal Bar Legs | 24 inches | 2 legs | Wide, modern table supports |
| Likapop Z-Type Legs | 16 inches | 2 legs | Low tables that need leveling |
| JIANZHUO Round Leg | 16 inches | 1 base | A round, pedestal-style design |
SMARTSTANDARD 16-Inch Hairpin Legs
These four black hairpin legs are a straightforward choice for a low end table with a simple, open profile. They are made from 3/8-inch cold-rolled steel and have a satin black powder-coated finish. Each mounting bracket has five pre-drilled holes, and the package includes rubber feet to help protect flooring.
Best for: DIY builders who want a set of four legs for a compact table and prefer a mid-century-inspired hairpin shape. The product listing states a 300-pound support capacity, making it important to consider the complete furniture setup and how weight will be distributed.
Limitation: At 16 inches high, these legs are better suited to low tables than taller side tables. The listed capacity should not be treated as a guarantee for every tabletop or installation.
VEVOR 24-Inch Three-Rod Hairpin Legs
This set includes four 24-inch carbon-steel legs with a three-rod design and black powder-coated finish. The listing states that each leg can hold up to 220 pounds and that the set of four has a total capacity of 880 pounds. Rubber covers are included for floor protection or added stabilization.
Best for: Buyers making a taller end table, desk, or bench who want four separate supports. Compared with the 16-inch SMARTSTANDARD set, VEVOR’s legs provide eight additional inches of height and a multi-rod hairpin appearance.
Limitation: The 24-inch height may be too tall for a low coffee-style table. Check the intended finished table height before choosing.
ALLCOS 24-Inch Metal Bar Legs
ALLCOS supplies two iron legs measuring 24 inches high by 13.78 inches wide. The listing describes a baking-finished surface, pre-drilled mounting holes, and included screws. It also states a maximum load weight of 800 pounds. The seller recommends using a board at least two inches wider than the product.
Best for: Builders who want a broad, geometric support style rather than thin hairpin rods. The wide shape may suit an end table with a modern look, and the supplied screws and pre-drilled plates can simplify assembly.
Limitation: This is a two-piece set, not four individual legs. Confirm that the tabletop dimensions and mounting layout suit this support configuration before purchase.
Likapop 16-Inch Z-Type Legs
These two 16-inch metal legs have a Z-shaped profile and measure 30 centimeters wide. Four adjustable foot pads are included, with a stated adjustment range of 1.2 inches. The pads are described as anti-slip and wear-resistant, and the legs have a baked finish intended to resist scratching, peeling, and oxidation.
Best for: Buyers who want a sculptural support shape and need some adjustment to help level a table. The included foot pads distinguish this pair from fixed-height hairpin options.
Limitation: The set contains two legs. The listing does not state a load capacity, so do not compare its strength with products that provide a specific capacity figure.
JIANZHUO 16-Inch Round Table Base
This round metal base is listed as 16 inches high, with a 16.5-inch bottom diameter. Its pre-drilled mounting plate is intended to make installation easier. Three adjustment pads are included to help stabilize a wobbly table and protect the floor.
Best for: Anyone seeking a round-base look instead of four corner legs or a two-leg frame. Its broad circular footprint offers a different visual approach for a small end table.
Limitation: The provided product details do not specify a load capacity or material. Check the listing and tabletop dimensions carefully before deciding whether this base fits the project.
Buying Guide: How To Choose Metal End Table Legs
What height should end table legs be?
Start with the desired finished height, including the tabletop. The products here range from 16 to 24 inches, and adjustable feet can add or change height within their stated range. Measure the location beside the sofa or chair so the table will be practical for its intended use.
Should you choose four legs, two legs, or a round base?
Four separate legs provide a familiar corner-mounted layout. Two wide legs create a frame-like appearance, while a round base offers a pedestal-style design. Check the product’s set quantity and plan the mounting position before ordering; these configurations are not interchangeable without considering tabletop size and balance.
How should you compare load capacity?
Only some listings provide a capacity figure. SMARTSTANDARD lists 300 pounds, VEVOR states up to 220 pounds per leg and 880 pounds for four, and ALLCOS lists up to 800 pounds. These figures are manufacturer-provided claims, not a guarantee for every tabletop, fastener, or floor. Follow installation instructions and account for how weight will be distributed.
Which features help protect floors and improve stability?
Look for included rubber feet or adjustable pads if floor protection or leveling matters. SMARTSTANDARD and VEVOR include rubber feet or covers, while Likapop and JIANZHUO list adjustment pads. A level floor, secure mounting, and a suitable tabletop remain important.
Frequently Asked Questions
Can 16-inch metal legs be used for an end table?
Yes. The 16-inch SMARTSTANDARD, Likapop, and JIANZHUO options are listed at that height. Include tabletop thickness when calculating the finished table height.
Are two metal legs enough for an end table?
Some designs use two broad supports rather than four individual legs. Choose a two-leg product only when its mounting layout and tabletop dimensions fit the project.
Do metal table legs come with mounting hardware?
Hardware varies. ALLCOS lists included screws, and the other product details mention pre-drilled mounting plates but do not consistently specify supplied screws. Check the product listing before assembly.
Which option includes adjustable feet?
Likapop includes four adjustable pads with a stated 1.2-inch adjustment range. JIANZHUO includes three adjustment pads, but its listing does not state an adjustment range.