Best R-19 23-Inch Insulation for 2×6 Framing
For R-19 insulation close to 23 inches wide, choose a fiberglass batt that matches your framing layout and moisture-control plan. The Owens Corning faced 23-by-48-inch batt is the closest listed match to the search; the 24-inch-wide faced and unfaced options offer alternatives for different installation needs. The 15-inch and 16-inch products suit narrower framing rather than a 23-inch cavity. Check the product dimensions and coverage against your project before ordering.
| Product | Best for | Key detail |
|---|---|---|
| R-19 Faced 23 by 48 | Buyers seeking a 23-inch-wide batt | Kraft faced; listed as 1,280 sq. ft. total |
| R-19 Unfaced 24 by 96 | Installations with separate moisture control | 128 sq. ft. per pack |
| R-19 Unfaced 15 by 93 | Narrower cavities or retrofit work | 77.5 sq. ft. per bag |
| R-19 Faced 24 by 96 | Wide-batt projects needing a facing | Kraft faced; listed as 1,280 sq. ft. total |
| R-19 Faced 16 by 96 | 16-inch-wide framing | 853.3 sq. ft. total; 6.25 inches thick |
Owens Corning R-19 Faced 23 By 48
Best for: Buyers specifically looking for a listed 23-inch-wide R-19 batt. Its product name gives a 23-by-48-inch size and identifies it as faced fiberglass for 2×6 floors or walls.
The listing describes Kraft facing as a moisture barrier for exterior surfaces. It states that the package includes 10 bags in two bundles and lists 1,280 square feet of coverage. Confirm the package quantity and coverage for your order, since the listed dimensions and coverage should be checked against the actual area to insulate.
Choose this if the 23-inch width matches your cavity and you want a faced batt. Caution: The listing’s 48-inch length may require more pieces or seams than longer-batt options.
Owens Corning R-19 Unfaced 24 By 96
Best for: Projects using 24-inch-wide batts where the installer plans moisture control separately. This unfaced product is listed for 2×6 wall, floor, and crawlspace installations.
The product details state that each pack contains five batts and covers 128 square feet. The listed thickness is 6.5 inches, with an R-19 value. Because it is unfaced, it does not include a facing layer; that can suit assemblies where a separate vapor-control approach is specified.
Choose this if you need a longer 96-inch batt and do not want an attached Kraft facing. Caution: Confirm that the 24-inch product width suits the framing; it is not labeled as 23 inches.
Owens Corning R-19 Unfaced 15 By 93
Best for: Buyers insulating narrower cavities or handling retrofit applications. This is the narrowest option in the selected list, with a stated 15-by-93-inch size and 6.5-inch thickness.
The listing says one bag contains eight batts and covers 77.5 square feet, or 9.69 square feet per batt. It is unfaced and described for deeper 2×6 walls or retrofit applications where moisture control is separate.
Choose this if your measured cavity calls for a 15-inch batt and you need unfaced insulation. Avoid this if you need coverage across a 23-inch-wide cavity; this product is substantially narrower than the target width.
Owens Corning R-19 Faced 24 By 96
Best for: Buyers who want a longer, faced batt listed for 2×6 floors or walls. The product name specifies 24-by-96-inch batts, while its features identify Kraft facing and a moisture barrier for exterior surfaces.
The listing describes 10 bags supplied as two bundles of five and states total coverage of 1,280 square feet. Compared with the 23-by-48 listing, this option has a longer stated batt dimension, which may better suit layouts where fewer short pieces are preferred.
Choose this if a 24-inch-wide faced batt matches your project. Caution: The listed width is 24 inches, not 23; verify cavity and product measurements before purchase.
Owens Corning R-19 Faced 16 By 96
Best for: Projects with 16-inch-wide framing rather than 23-inch cavities. This Kraft-faced fiberglass product is listed for 2×6 exterior walls and measures 16 by 96 inches, with a stated thickness of 6.25 inches.
The listing gives total coverage of 853.3 square feet for 10 bags in two bundles of five. Its narrower width makes it a distinct alternative for smaller framing bays, not a direct substitute for a 23-inch batt.
Choose this if your measured framing calls for 16-inch-wide insulation and you want a faced product. Avoid this if you are insulating a 23-inch-wide cavity without a plan for the remaining space.
Buying Guide: How To Choose R-19 Insulation
What does “23-inch insulation” mean?
Product titles may use nominal dimensions, and the listings here include sizes of 23 inches and 24 inches. Measure the framing cavity and compare it with the manufacturer’s stated batt width before buying. Do not rely on the search phrase alone to determine fit.
Should you choose faced or unfaced batts?
Faced options in this selection have Kraft facing, described in their listings as a moisture barrier for exterior surfaces. Unfaced batts have no attached vapor barrier and are intended for installations with separate moisture control. Follow the design requirements for your wall, floor, or crawlspace assembly; facing choice is not interchangeable in every application.
How should you compare coverage?
Compare the stated square footage per pack with the area to insulate, then account for cavity dimensions and cuts. The listings vary in package coverage and batt length. Check the product page and package details for the exact quantity, especially where a listing combines multiple bags or bundles.
Does R-19 indicate batt size?
No. R-19 is the insulation’s stated thermal resistance value, while width, length, and thickness describe its dimensions. These products are listed at 6.25 or 6.5 inches thick, depending on the model. Verify all dimensions and framing suitability before installation.
Frequently Asked Questions
Which listed product is closest to 23-inch-wide R-19 insulation?
The Owens Corning R-19 Faced 23 by 48 product is the closest match by its listed width. Confirm its actual dimensions and coverage before ordering.
Can I use a 24-inch batt in a 23-inch cavity?
The listings do not establish that a 24-inch batt will fit your specific cavity. Measure the framing and verify the product’s stated dimensions rather than assuming compatibility.
Which option has no facing?
The 24-by-96-inch and 15-by-93-inch Owens Corning R-19 products are listed as unfaced.
Which product is suited to 16-inch framing?
The R-19 Faced 16 by 96 product is specifically listed at 16 inches wide. Confirm that this matches your framing layout.