Best TV Wall Mount Extension Arms for VESA Fit and Flexible Viewing
The best TV wall mount extension arms depend on whether you need to fix a VESA hole-pattern mismatch or move a screen farther from the wall. PUTORSEN is suited to adapting certain smaller mount patterns, while MIAOXY offers four arms for patterns up to 400x400mm. VIVO is designed for low-VESA ceiling-mount setups. For a complete long-reach wall mount, compare BONTEC and Perlegear, both of which extend 37.4 inches.
| Product | Best for | Key detail |
|---|---|---|
| PUTORSEN VESA Adapter | Adapting specified VESA patterns | Supports screens up to 66 pounds |
| MIAOXY Extension Arms | Replacing or extending a compatible existing mount | Four arms; up to 99 pounds |
| VIVO Vertical Extender | Low-VESA ceiling-mount configurations | Raises the VESA pattern 6.5 inches |
| BONTEC Long Arm Mount | Reaching across a room or around a corner | Extends 37.4 inches |
| Perlegear Long Arm Mount | Long reach with a higher stated capacity | Extends 37.4 inches; up to 110 pounds |
PUTORSEN VESA Extension Adapter
Best for: Buyers who have an existing mount but need to match one of the adapter’s listed TV hole patterns. This steel adapter lets a 100x100mm mount accommodate 300x200mm, 200x300mm, and 300x300mm patterns. It also allows a 200x200mm mount to accommodate patterns up to 400x400mm.
The kit is listed for 32- to 55-inch LED or LCD TVs and monitors and supports up to 66 pounds. It is a practical choice when the mount itself is suitable but its VESA pattern does not line up with the screen. Limitation: Confirm that your exact mount and TV patterns are covered; the adapter does not replace a complete wall mount.
MIAOXY Four-Arm VESA Adapter Kit
Best for: Owners of a compatible existing bracket who need extension arms for a 32- to 55-inch TV with a larger VESA pattern. MIAOXY says its arms adapt smaller spacing to patterns up to 400x400mm. The kit includes four arms and mounting hardware, and its cold-rolled steel construction is rated for up to 99 pounds when properly installed.
Choose this if separate arms suit your current mount better than a one-piece adapter plate. The existing wall mount must also support the TV’s weight. Limitation: This is not a complete wall mount and does not include a center plate, so it should not be treated as a standalone mounting system.
VIVO Vertical VESA Extender
Best for: A low-VESA-pattern television being installed with a compatible ceiling mount. This two-bracket kit raises the TV’s existing VESA pattern by 6.5 inches, which can improve fit with vertical VESA brackets and help avoid collision.
This is a specialized vertical extender rather than a general-purpose wall-mount arm. Limitation: VIVO specifies that the mount must have vertical brackets no wider than 1.25 inches. Check compatibility before ordering; this product is not the right choice for extending a screen horizontally from a wall.
BONTEC 37.4-Inch Full-Motion Mount
Best for: Buyers who mean a long, articulating wall-mount arm rather than a VESA adapter. The three-section arm extends up to 37.4 inches and retracts to 2.9 inches. It fits 26- to 65-inch flat and curved screens, supports VESA patterns from 200x200mm to 400x400mm, and holds up to 77 pounds.
Its listed adjustments include up to 90-degree swivel in either direction, +5/-10-degree tilt, and 4-degree leveling. It is designed for wood studs, brick, or concrete. Limitation: The product information excludes drywall-only installation, and the stated reach does not mean every room layout will allow full movement.
Perlegear 37.4-Inch Long-Arm Mount
Best for: Buyers seeking a full-motion mount with long reach and a higher listed weight capacity than the BONTEC option. It fits most 32- to 65-inch TVs with 100x100mm to 400x400mm VESA patterns and supports up to 110 pounds. The arm extends 37.4 inches and retracts to 2.6 inches.
Perlegear lists up to 90-degree swivel, +5/-15-degree tool-free tilt, and 3-degree leveling after installation. It can mount to a single wood stud or solid concrete. Limitation: It cannot be installed on drywall alone. Confirm the TV’s weight, VESA pattern, and wall construction before choosing it.
Buying Guide: How To Choose TV Wall Mount Extension Arms
Do you need an adapter or a longer arm?
VESA adapter arms address a mismatch between the hole spacing on a TV and an existing mount. They do not create long-reach movement by themselves. A full-motion mount such as BONTEC or Perlegear is the relevant category when you want to pull the screen away from the wall, swivel it, or reposition it for different viewing areas.
Which measurements should you check?
Measure the TV’s VESA pattern: the horizontal and vertical distances between its mounting holes, in millimeters. Compare that measurement with both the TV and mount requirements. Also check screen size and weight. For adapter kits, confirm the exact pattern combinations in the product description; a similar-looking measurement is not enough to establish compatibility.
How much weight and reach do you need?
For an adapter, the complete setup is limited by the capacity of its weakest component: the TV, adapter, existing mount, and wall attachment. For full-motion arms, compare the TV’s weight with the mount’s stated limit and consider how much extension your room requires. Longer reach can help with corner placement, but it also makes secure installation especially important.
What wall types are supported?
Check the mounting instructions for the specific product and the construction behind the wall. BONTEC lists wood studs, brick, and concrete, while Perlegear lists a single wood stud or solid concrete. Neither is specified for drywall alone. Use appropriate installation hardware and do not assume that an adapter kit includes a complete wall-mount system.
Frequently Asked Questions
Are VESA extension arms complete TV wall mounts?
No. Adapter arms such as the MIAOXY kit are intended to work with a compatible existing mount. Check the package details to confirm what hardware is included.
How do I know whether an adapter fits my TV?
Measure the TV’s VESA hole spacing and compare it with the adapter’s supported patterns, then verify the existing mount’s pattern and weight capacity.
Can I use a long-arm mount on drywall alone?
The BONTEC and Perlegear product details say not to install on drywall alone. Follow the chosen mount’s installation requirements for the wall structure.
Which option offers the longest stated extension?
BONTEC and Perlegear each list a maximum extension of 37.4 inches. Both are complete full-motion mounts, not VESA adapter-only kits.