Best Vertical Vinyl Siding Options and Installation Accessories
The strongest direct vertical vinyl siding option in this selection is CertainTeed Board and Batten, which is designed for whole-house or accent applications. The other products are mounting accessories—not siding panels—that can help finish lighting or electrical installations on lap siding. Choose the siding for a board-and-batten appearance, and match any accessory to your siding’s profile and thickness before buying.
| Product | Best For | What It Is |
|---|---|---|
| CertainTeed Board and Batten | Vertical siding or accents | Vinyl siding |
| Qishiyi Built-In Electrical Box | Lights on 1/2-inch lap siding | Mounting block |
| Qishiyi Vertical Lap Mounting Block | Lighting installations | Mounting block with electrical box |
| Arlington DBVR151-1 | Existing 5/8-inch vertical lap siding | Adapter plate |
| Joworthy 8141 Mounting Blocks | Two lighting locations | Mounting block kit |
CertainTeed Board and Batten Vertical Vinyl Siding
Best for: Homeowners choosing vertical vinyl siding for an entire house or an exterior accent. This is the only product in the selection that is siding itself, rather than an accessory.
The listed design has a flat-face board and a 1/2-inch batten height, creating a straight, even surface. The product listing identifies it as a commonly used option for both whole-house and accent applications. Its Colonial White finish is part of the product name.
Why it was selected: Board-and-batten styling is a direct match for shoppers seeking vertical siding. Limitation: The provided product information does not specify installation instructions or detailed dimensions beyond the listed 12-foot-6-inch siding length and 8-inch single panel description. Confirm the required coverage and project details before ordering.
Qishiyi Octagonal Light Mounting Block
Best for: Adding an outdoor light where the siding is 1/2-inch lap siding and a built-in electrical box is useful. This is an installation accessory, not a siding panel.
The kit includes a white octagonal mounting block, built-in electrical box, cable connector, and four mounting screws. Its box is listed as 4 inches in diameter and 1/2 inch deep. A bottom drainage hole is intended to help prevent water from collecting in the box. The plastic surface can be painted.
Why it was selected: It combines a mounting plate and electrical box for a defined siding thickness. Limitation: The listing specifies 1/2-inch lap siding, so verify the profile and thickness of the installed siding rather than assuming it fits every vertical siding system.
Qishiyi Vertical Lap Siding Light Kit
Best for: Buyers who specifically need a two-piece light mounting kit described for 1/2-inch vertical lap siding. It is also listed for flat surfaces such as fiber cement boards and T-111.
Each block has a pre-installed junction box and cable connector. The listing describes drilling a hole, running wire, and securing the block with included screws. Its textured plastic is paintable, and a drainage hole is included at the bottom.
Why it was selected: The product description directly names vertical lap siding and gives a thickness, making it a relevant accessory for vertical-siding projects. Limitation: The stated fit is for 1/2-inch profiles; check the actual siding shape before installation.
Arlington DBVR151-1 Vertical Adapter Plate
Best for: Retrofit work involving existing 5/8-inch vertical lap siding and a compatible flat-surface DBVR1. The adapter plate is intended to convert that flat surface for use on existing siding.
The product listing identifies its siding style as vertical and its fit as 5/8-inch lap. Arlington offers multiple sizes, so matching the adapter size to the siding style is important.
Why it was selected: It addresses an existing-siding retrofit rather than a new panel installation. Limitation: It is a sizing-specific adapter, not a complete siding or lighting kit. Confirm the DBVR1 and siding requirements for the project.
Joworthy 8141 Two-Set Mounting Block Kit
Best for: Buyers planning two light mounting locations on 1/2-inch lap siding. The kit includes two white mounting blocks, two cable connectors, four short screws, and four long screws.
The manufacturer describes the blocks as weather-resistant plastic intended to withstand rain, sunlight, and temperature changes. The blocks provide a mounting surface for outdoor fixtures, but the listing does not describe them as siding panels.
Why it was selected: It offers two installation points in one kit and specifies a 1/2-inch siding fit. Limitation: Its stated fit is limited to the listed siding profile; check dimensions and fixture requirements before use.
Buying Guide: Choosing Vertical Vinyl Siding And Accessories
Are you buying siding or a mounting accessory?
Start by separating panels from finishing parts. CertainTeed Board and Batten is the siding option here. The mounting blocks and adapter plates are accessories for lights or electrical installations. They do not replace siding, and they should not be treated as interchangeable with siding panels.
What siding profile and thickness do you have?
Check the manufacturer’s product details and the installed siding before choosing a mounting block. Several listed accessories specify 1/2-inch lap siding, while the Arlington adapter is listed for 5/8-inch vertical lap. A mismatch can prevent a neat fit, so do not rely on appearance alone.
Do you need a built-in electrical box?
For a light installation, compare whether the mounting block includes a box and cable connector. The Qishiyi kits list built-in electrical boxes; the Joworthy kit lists mounting blocks and cable connectors. Confirm that the selected part suits the planned electrical installation, and follow applicable local requirements.
Is the project new siding or a retrofit?
For new vertical siding, plan panel coverage and accessory placement together. For existing siding, the Arlington adapter is specifically described for a retrofit on 5/8-inch vertical lap siding. Confirm all required components and measurements before beginning either type of project.
Frequently Asked Questions
What is the direct vertical vinyl siding option in this list?
CertainTeed Board and Batten is the only listed product that is vinyl siding. The other selections are mounting or electrical accessories.
Can a 1/2-inch mounting block fit any vertical vinyl siding?
Not necessarily. The listed blocks specify particular lap-siding profiles and thicknesses. Verify the siding’s shape and measurements before choosing one.
Which listed product is intended for 5/8-inch vertical lap siding?
The Arlington DBVR151-1 adapter plate is listed for 5/8-inch vertical lap siding and existing-siding retrofit use.
Do the mounting blocks include electrical boxes?
The two Qishiyi products in this article list built-in electrical boxes. Check each product’s package contents, since other mounting blocks may provide a plate and connector without the same listed box.
Are mounting blocks a substitute for vertical siding?
No. Mounting blocks are accessories for mounting fixtures or providing an installation surface. They are not siding panels.