Best Water Well Jet Pumps for Shallow and Deep Wells
The best water well jet pump depends on your well depth, water demand, and whether you need a pressure tank. The Acquaer convertible pump suits buyers who want one pump for shallow or deeper well setups; the Wayne is designed for wells 25–90 feet deep; and the Acquaer shallow-well model is a simpler option for wells up to 25 feet. For irrigation, the Red Lion offers a stated flow of up to 23 gallons per minute, while the FOTING includes a pressure tank for automatic water boosting.
| Product | Best For | Key Detail |
|---|---|---|
| Acquaer Convertible | Shallow or deep well flexibility | Up to 25 feet or 90 feet, depending on setup |
| Acquaer Shallow Well | Wells up to 25 feet | 1 HP, dual voltage |
| WAYNE CWS100 | Deeper well installations | Preset 30–50 PSI switch |
| FOTING 1.5HP | Home and garden boosting | Includes a 5-gallon pressure tank |
| Red Lion RJS-100-PREM | High-flow shallow-well use | Up to 23 GPM |
Acquaer Convertible Shallow And Deep Well Pump
Best for: Buyers who need a pump that can be configured for either a shallow or deeper well. Its listed setup supports single-pipe wells from 0–25 feet or two-pipe wells from 26–90 feet, and the product includes venturis and an ejector kit.
The 1 HP motor is described as providing strong suction and high flow. Dual voltage allows operation at 115V or 230V, although the pump is factory-set to 230V. An automatic pressure switch and thermal overload protection are listed, along with automatic shutoff protection when water runs out.
Limitation: Deeper-well operation requires the two-pipe configuration, and the factory voltage setting may need attention before installation.
Acquaer 1 HP Shallow Well Jet Pump
Best for: A shallow-well setup where the water source is no deeper than 25 feet. This cast-iron pump has a 1 HP motor, an automatic pressure switch, and dual-voltage operation at 115V or 230V.
Choose this model if you want a straightforward shallow-well pump rather than a convertible unit for deeper installations. The listed automatic shutoff helps protect the motor if the pump runs out of water. Its factory setting is 230V, so confirm the required electrical setup before use.
Limitation: The stated well-depth range is limited to 25 feet; this model is not the choice for a deeper well configuration.
WAYNE CWS100 Convertible Jet Well Pump
Best for: Buyers with a well in the 25–90-foot range who want a 1 HP cast-iron pump. The model is listed for deeper wells and can run at 115V or 230V. Its factory voltage setting is 115V, and the pressure switch is preset to 30–50 PSI for automatic operation.
The cast-iron volute includes a dedicated priming port for filling the volute. The listing states a capacity of up to 588 gallons per hour. This model is a better fit for deeper-well use than pumps specified only for shallow wells.
Limitation: The jet assembly is required and sold separately, so account for that component when planning the installation.
FOTING Shallow Well Pump With Pressure Tank
Best for: Home, garden, and farm users looking for a pump-and-tank system for boosting water pressure. The listed package includes a 5-gallon tank, pressure gauge, pressure switch, and two adapters. The 1.5 HP motor is specified for suction up to 23 feet, a maximum flow of 1,340 gallons per hour, and a maximum lift of 164 feet.
The pressure switch is described as starting the pump at 1.5 bar and stopping it at 3 bar. Its reinforced thermoplastic structure and iron tank are listed as corrosion- and wear-resistant, and the pump includes overheat protection.
Limitation: The stated suction depth is 23 feet, so choose another configuration for a well beyond that range.
Red Lion RJS-100-PREM Shallow Well Pump
Best for: Shallow-well users who prioritize a clearly stated flow rate. The 1 HP pump is listed for up to 23 gallons per minute and uses a cast-iron casing and volute. It has a 1-1/4-inch FNPT suction intake and a 1-inch FNPT discharge.
The motor supports 115V or 230V, and the listing notes that the voltage must be selected to match the incoming power supply. A capacitor is included for increased starting power, and the product listing identifies the pump as CSA listed in the United States and Canada.
Limitation: The product information provided does not state a maximum well depth, so verify that it suits the specific installation before choosing it.
Buying Guide: How To Choose A Water Well Jet Pump
How deep is the water source?
Check the pump’s specified suction or well-depth range before comparing motor power. Shallow-well models in this list are specified for depths up to 23 or 25 feet. For deeper wells, look for a convertible model with the correct ejector or jet configuration. The Acquaer convertible pump lists two-pipe operation for 26–90 feet, while the WAYNE is listed for 25–90 feet.
Do you need a pressure tank?
A pump with a tank can combine water boosting and pressure storage in one system. The FOTING includes a 5-gallon tank, pressure gauge, and pressure switch. If a tank is not included, check what additional components your installation requires rather than assuming they are part of the pump.
What flow rate and voltage should you compare?
Match stated flow capacity to the intended use, such as household supply or irrigation, while recognizing that actual performance depends on installation conditions. Only the Red Lion listing gives a maximum flow of 23 GPM among the selected products. Confirm the available power supply and the motor’s voltage setting: several models support 115V and 230V but arrive preset to one voltage.
Which materials and protections matter?
Cast-iron and stainless-steel housings are listed on some models, while the FOTING uses a reinforced thermoplastic structure with an iron tank. Compare those materials with the installation environment and the manufacturer’s instructions. Thermal or overload protection is listed on some pumps, but it does not replace correct priming, wiring, and dry-running precautions.
Frequently Asked Questions
What is a jet pump used for?
A jet pump moves water from a well or boosts water pressure. The suitable type depends on the well depth and the pump’s specified configuration.
Can a shallow well jet pump serve a deep well?
Not automatically. A deep-well installation requires a pump designed for that depth and the appropriate jet or ejector arrangement.
What does convertible mean for a well pump?
A convertible pump can be configured for shallow- or deeper-well service when used with the specified piping and jet components.
Should I choose 115V or 230V?
Choose the voltage that matches the electrical supply and the pump’s wiring instructions. Some listed models support both voltages but arrive factory-set to one.
Does a well jet pump always include a pressure tank?
No. Some pumps include a tank, such as the FOTING model listed here, while others are sold without one or require additional components.